Tone2 BiFilter 2 is a high-end quality stereo filter module. BiFIlter 2 drastically extends the ‘filter plug-in’ concept to provide today’s creative musicians with an extremely powerful multi-effect tool. Years of research were necessary to create the ultimate filter module for today’s musicians. We are certain that you will find it to be a useful and powerful tool in your musical arsenal and have a lot of fun making music with BiFilter2. BiFilter2 offers dual multi-mode filters with 47 unique and diffenent sounding filter types, 8 additional distortion types, FM, AM, waveshaping and lo-fi effects create new and unheared sounds. A high presicion display shows the frequency response of the filter in realtime and it makes BiFilter2 very easy to use and understand.

Buy Tone2 BiFilter 2 – 39 EUR / 49 USD

Demo Download
(Stops sound after 10 minutes, 2.7 Mb Zip Archive) :
Tone2 Bifilter 2

Audio Demos (Mp3 File):
Tone2 BiFilter 2 Audio Demo

BiFilter 2 Features:

• 47 unique, differnt sounding filter types
• 8 distortion types
• FM, AM, Waveshaping, bit crushing, resampling, comb filtering, vocal filtering, equalizing, reverbaration
• High precision, real time frequency responce display
• Smooth and click-free knob movements
• High-end quality filter algorithms, anti-aliasing, oversampling
• True stereo arcitecture, works in all known samplerates
• Easy to use interface
• 100 presets
• Midi and automation support
• High performance

BiFilter 2 distortion types:

• Off – When this mode is selected, the distortion module will be bypassed.
• Volume – Drive controls the volume of the signal.
• Tube Amp – A ‘soft knee’ saturated distortion.
• Transistor – An asymetric ’soft knee’ distortion.
• Presence – A ‘soft knee’ saturated distortion with falloff at higher levels.
• Hard Clip – A ‘hard knee’ clipping distortion.
• Bitcrush – This distortion type reduces the bitrate of the audio to ‘lo-fi’.
• Waveshape – This distortion type adds additional harmonics by using round nonlinear amplification of the audio signal.
• Pow2 – This distortion type adds additional harmonics by using edged nonlinear amplification of the audio signal. It is similar to exciters.

BiFilter 2 filter types:

• Off – The filter is disabled.
• LP 30dB – A lowpass filter with a 30dB/Octave slope.
• LP 12dB – A lowpass filter with a 12dB/Octave slope.
• LP Analog – A analogue modeled lowpass filter with self oscillation.
• LP Moog – A lowpass filter with a classic ‘Moog Diode Ladder Filter’ type response.
• LP Fat – A lowpass filter with very broad resonance.
• LP Oct – A lowpass filter with resonance tuned in octave distance from the cutoff point.
• LP Elliptic – A ‘brickwall like’ lowpass filter with very steep slope.
• HP 30dB – A highpass filter with a 30dB/Octave slope.
• HP 12dB – A highpass filter with a 12dB/Octave slope.
• HP Elliptic – A ‘brickwall like’ highpass filter with very steep slope.
• HP Analog – A analogue modeled highpass filter with self oscillation.
• BP 15dB – A bandpass filter with a 15dB/Octave slope.
• BP 6dB – A bandpass filter with a 6dB/Octave slope.
• BP Analog – A analogue modeled bandpass filter with self oscillation.
• BR – A band rejection or notch filter with an adjustable center frequency and slope.
• BR Analog – A analogue modeled notch filter with self oscillation.
• EQ Low Shelf – A lowpass shelving filter.
• EQ Hi Shelf – A highpass shelving filter.
• EQ loudness – A loudness filter.
• EQ Peak 1 – An equalizing filter with a broad slope.
• EQ Peak 2 – An equalizing filter with a tight slope.
• EQ Block – cuts all frequnecies below and above the selected range.
• VOC IEAOU 1 – A series of vocal formant filters emitted by vowel use in human speech.
• VOC IEAOU 2 – A series of vocal formant filters emitted by vowel use in human speech.
• VOC A – A vocal formant filter.
• VOC – A vocal formant filter.
• VOC – A vocal formant filter.
• VOC I – A vocal formant filter.
• VOC O – A vocal formant filter.
• W-Shape – Double parallel-switched bandpass filters.
• M-Shape – Serial lowpass and highpass filters, with 2 resonant maxima at the edges of the filter.
• Allpass – Does nothing, just changes the phase of the signal.
• Phaser – A phasing filter that affects the phase offset of the incoming audio stream.
• Comb 2x – A comb filter, with multiple equally spaced resonance peaks.
• Comb 3x – A different comb filter, similar to Comb 1.
• Comb 5x – A different comb filter, similar to Comb 1.
• Resonator – An oscillator which is excited from the input signal.
• Diffuser 8x – A 8 step diffuser filter with feedback. Sounds like small room reverb.
• Diffuser 32x – A 32 step diffuser filter with feedback. Sounds like large room reverb.
• Delay – Delays the input signal by a given ammount.
• Resample – Resamples the signal to a lower samplerate.
• AM – Amplitude modulatuion.
• Formant 2 – Double formant (vocal) filter with 2 resonant maxima.
• FM Sine – Frequency modulation with a sine oscillator.
• FM Tri – Frequency modulation with a triangle oscillator.
• FM Saw – Frequency modulation with a saw oscillator.
• FM Square – Frequency modulation with a square oscillator.

BiFilter 2 System Requirements:
VST/AU compatible host software, Windows 9x/XP/Vista or Mac OS X, 4 Mb free harddisc space, processor with at least 100 MHz

Tone2 BiFilter 2 Screenshot

Buy Tone2 BiFilter 2 – 39 EUR / 49 USD

Related product: Tone 2 BiFilter Free

More info and demos: Tone2.com

Popularity: 5%

Tags: analog, delay, distortion, effect, equalizer, exciter, filter, harmonics, moog, mp3, reverb, sampler, samples, tube, vst, wav

This entry was posted on Thursday, January 11th, 2007 at 4:45 pm and is filed under Software, Tone2. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.