Audio Technica Pro 44 Cardioid Condenser Boundary
(No Ratings Yet)
Loading ...
The Pro 44 is a Unidirectional condenser boundary microphone
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO 44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mics self-contained electronics eliminate the need for external power modules. The PRO 44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance. Features:
- Low profile for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25 ft (7.6 m) detachable cable (TA3F to XLRM-type)
Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
- Frequency Response: 70-16,000 Hz
- Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Max. SPL: 114 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (typical): 86 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 66 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 9-52V, 2 mA typical
- Weight: 2.4 oz (67 g)
- Dimensions: 2.87 inches (73.0 mm) maximum width, 3.56 inches (90.5 mm) maximum length, 0.59 inches (15.0 mm) height
- Output Connector: TB3M-type
- Cable: 25 ft (7.6 m) long, with TA3F and XLRM-type connectors
